11 Steps to Spray Paint Your Car Like the Professionals - Car Bodywork Paint Repair

11 Measures to Spray Paint Your Car Like the Professionals - Car Bodywork Paint Repair



You may be surprised to find just the way to spray car paint really can not be difficult. That doesn't mean that you can only grab a tin of paint and go at it. There are some fundamentals you have to understand. Both in application and the preparation.

Step A:

Prepare by assembling all your things that you're going to need. For other regions cover well with paper and masking tape.

Measure B:

You'll have to examine the car carefully for any rough spots. This will smooth out the rough spots. Additionally, it allows the aerosol auto paint to adhere better. Be sure all the dust dirt and debris are taken from the vehicle once you've finished sanding. It's imperative the car be absolutely clean.

Step C:

You'll need to apply a primer. This will make sure that you get an overall even coat of your coloured paint plus helps the paint to stick well. When you spray the primer, be sure to apply light layers and allow for drying in between. How exactly to spray car paint takes a little getting used to.

Step D:

Now you're pretty well to the point where you happen to be around ready to spray on the colour. In any case, make a few practice strokes on an item before you start with the auto. After you might be ready, start the passes with the paint without hesitation. You may end up with uneven coverage if you hold the spray can or gun in one area and perhaps the paint will run. If it happens you've got an important repair job on your had. You'll most likely have instructions as to how you can spray on car paint using the spray or equipment cans.

Step E:

It is up to you whether you desire to wet sand between coats of colour and primer paints. You may want to study this choice on the web, or check with someone that's familiar with just how to spray on auto paint

Step F:

Once you're completely satisfied with the color, you are down to the finishing touches. You'll now need to apply several coatings that are clear. This can give the shine and finished appearance to the auto in addition to protect the finish. It's going to be up to you although likely two Alloy Wheel Repair London coatings will be sufficient. Make absolutely certain it's dry in between coats.

Step G:

Yet again, you have the option of wet sanding if you prefer. Again, I suggest you ask the guidance of individuals which are comfortable with how to paint an automobile. If you decide to follow this step then you need to wet sand with these grits in this sequence. Use 800, 1000, 1200, 1500 and the finally the 2000. This will remove spots that'll be too heavy in the clear coat application.

Step H:

Now you may desire to using a rubbing compound to buff the surface in order to use a 2000 grit to remove any scratches.

Step I:

You should now buff the surface. To do this just use a medium cut polish.

Step J:

As a final touch, you might want to apply several coats of wax.